Data Center Monitoring Systems

From monitoring of individual cells in each of your backup batteries and providing a remotely accessible dashboard showing overall system health, to branch management control for your critical power systems; Computer Power & Service is your source for network or Internet monitoring of your critical power systems.  As each critical power system is unique CPSI integrates a variety of component monitoring sub-systems into one coherent overall monitoring system.

The Cellwatch battery monitoring solution for all UPS or telecommunications installations is permanently wired into each of your batteries and measures both voltage and Ohmic Value EVERY DAY.  Voltage is measured multiple times per day to look for UPS, breaker or cabling errors.  Ohmic values are monitored daily so you get early warning of impending failure. Data sets are stored for later analysis.  The Cellwatch battery monitoring system signals your facility management system, that a problem either exists or is impending.


The Toshiba RemotEye ll is a tool designed to control and monitor Toshiba UPS remotely via Simple Network Management Protocol (SNMP) and Hypertext Transfer Protocol (HTTP/web browser) methods.  In addition, when a power outage occurs, notification can be sent to the network administrators or maintenance personnel.  Should a prolonged power outage occur, RemotEye II can initiate an orderly shutdown to connected servers to minimize any risk of data loss.

Mitsubishi DiamondLink software is a Web based advanced user-customizable power monitoring, management and shutdown software, designed to provide information about the power conditions of the UPS.  DiamondLink will monitor the health and status of your UPS and, when critical events occur, will perform a graceful, unattended shutdown. 



With Eaton Powerware's PowerVision Windows-based software, you can proactively monitor the health and performance of UPS, power distribution, and environmental systems across the enterprise from anywhere and enhance the reliability of the entire power protection infrastructure.

Managing individual circuit loading is critical to the reliability of your center.  The Cyberex Branch Circuit Management (BCM) system provides accurate load management information and alerts you of potential problems before they affect your operation.  User configurable set points allow you to know when each circuit is approaching a load threshold that could open your supply to that device.  This notification allows your staff to perform the required service to maintain your critical operation.

For a quote for remote critical power system monitoring call:
Computer Power & Service at (206) 782-7090.
You may also contact us using the Contact Form on this site,
or via email at